Filter Connection Error
#1
Posted 28 April 2004 - 12:33 PM
Filter Connection Error:
[Sonic Cinemaster DS Video Decoder]. Video Out --> [FFDShow Video Processor].In
And under that it says Pins did not accept connection
Can you guys please help me out?
Thanks!
#2
Posted 28 April 2004 - 08:49 PM
Same problem here.
Nvidia video card.
Unregistering FFDSHOW allows zoom player to work but that looses some nice filtering options
#3
Posted 28 April 2004 - 10:28 PM
#4
Posted 28 April 2004 - 10:49 PM
Here is older versions of FFDShow
http://dvd.box.sk/index.php?pid=sof...&pol=0&rid=7871
I was testing this out:
http://htpcnews.com/main.php?id=ffdshowdvd_1
#5
Posted 29 April 2004 - 01:31 AM
HKEY_LOCAL_MACHINE\Software\Sonic\Cinemaster DS DVD\2.5\VideoDecoder
Add a new "dword" key called "AllowAllRenderers" and set its value to "1".
#6
Posted 29 April 2004 - 08:20 AM
Any other suggestions?
#7
Posted 29 April 2004 - 08:21 AM
#8
Posted 29 April 2004 - 02:11 PM
Did you enable the "AllowAllRenderers" registry entry for sonic?
HKEY_LOCAL_MACHINE\Software\Sonic\Cinemaster DS DVD\2.5\VideoDecoder
Add a new "dword" key called "AllowAllRenderers" and set its value to "1".
I did that and result was same..
About old versions of FFDShow. Same broblem.
Mmh i have radeon 9700 too. Newest drivers.
Blight any ideas what is the broblem?
#9
Posted 29 April 2004 - 10:55 PM
Also, make sure hardware acceleration is disabled and VMR support is enabled in the sonic cinemaster control panel applet.
Attached Files
#10
Posted 30 April 2004 - 09:19 AM
Here is what it says, when i look for more info.
AppName: zplayer.exe AppVer: 0.0.0.0 ModName: ffdshow.ax
ModVer: 0.0.0.0 Offset: 000a5503
I can send the whole error raport to you if it helps. Do you want it?
#11
Posted 01 May 2004 - 01:27 PM
#12 Guest_Tim McCutcheon_*
Posted 01 May 2004 - 08:11 PM
I have exactly the same problem as Mage79's original post. I also followed the guide on HTPCNews to do the setup.
Tried everything suggested in this thread to this point including Blight's version of FFDShow, same problem...
Does anyone have any ideas to resolve this problem??
Edit: Problem resolved!! (was a slight spelling error on the registry entry)
Thanks,
Tim
#13
Posted 04 May 2004 - 09:27 PM
That is, a Windows dialog ... "zplayer.exe has encountered a problem and needs to close. We are sorry for the inconvenience." box, with "Send Error Report" and "Dont send" buttons.
More info gives me:
AppName: zplayer.exe AppVer: 0.0.0.0 ModName: ffdshow.ax
ModVer: 0.0.0.0 Offset: 000b2e23
So, I can see that ffdshow is the problem, but does anyone know how I might resolve it?
Thanks
Dave
#14
Posted 05 May 2004 - 04:28 PM
Might be a different version of ffdshow.
#15
Posted 05 May 2004 - 08:05 PM
#16
Posted 05 May 2004 - 09:44 PM
Is this normal?
The one that will not work is the UK (Region 2, PAL) version of 'Touching the Void'. Other disks (PAL and NTSC) seem to work OK.
Thanks for your help!
#17
Posted 05 May 2004 - 09:50 PM
This is from another post (which I've lost now damn it ...)
ffdshow does not support DFC's (Dynamic Format Changes) that the video decoder normally sends to the Overlay Mixer to resize the video surfaces from 720x480 NTSC to 720x576 PAL.
For PAL is your thing, add a DWORD registry value named "HardCodeForPal" in the HKLM\Software\Sonic\Cinemaster DS DVD\2.5\VideoDecoder directory and set it 0x00000001 and this will hardwire the video decoder to instruct ffdshow that PAL size surfaces are what it needs to allocate from the get go.
Thanks for your help!
Dave
#18
Posted 06 May 2004 - 04:54 AM
Make a post in the registry and tips section.
#19
Posted 07 May 2004 - 03:27 PM
#20
Posted 13 May 2004 - 12:53 PM